The motor won't start or can't lift the shutter
The motor doesn't respond, makes noise or stops halfway. We check the power supply, the switch and the limit switches, and repair it or replace it with one suited to the shutter's weight.
Shops, businesses and offices
Metal shutters and security shutters for business premises in Barcelona
If your business's shutter won't go up, won't close or has been damaged in a break-in attempt, every hour counts. We repair, install and motorise metal shutters for shops, bars and restaurants, and offices in Barcelona and its metropolitan area.
Open Monday to Friday, 08:30 to 20:00.
- Motors, axles, springs and slats
- Shutter locks: we are locksmiths
- Quote before we start
- Invoices for businesses
Repair
Your metal shutter won't open or close
A jammed shutter means you can't open to the public or can't leave your premises secure at night. These are the faults we fix most often:
Shutter jammed or out of its guide rails
Bent slats, dented guide rails or built-up dirt make the shutter stick. We straighten or replace the damaged parts so it runs smoothly again.
Springs or axle on manual shutters
If it's very hard to lift or won't stay up, the springs on the axle have lost tension or broken. We adjust or replace them.
Jammed or broken lock
As locksmiths, we repair or replace the shutter lock, locking bolts and keys, and can reinforce it with additional deadbolts or padlocks.
Shutter forced in a break-in attempt
We inspect the slats, guide rails, lock and motor, make securing your premises the priority and give you a detailed repair quote, which is also useful for your insurer.
Installation
Made-to-measure metal shutters for your business
We measure the opening, advise you based on your type of business and the security you need, and install the complete shutter.
Solid slats
They close off the shopfront completely. They offer more privacy and protection, and are a good option for offices, warehouses and premises without a shop window.
Micro-perforated slats
They let people see your shop window and let some light through with the shutter down, without giving up protection. Very common in street-level shops.
Roller grilles
They let you see inside and allow ventilation. Used at entrances, in shopping arcades or as a second shutter behind the main one.
Reinforced security shutters
Thicker slats, reinforced guide rails and security locks for businesses with valuable stock.
Motorisation
Motorise your shop shutter
Raising and lowering a metal shutter by hand every day is hard work and eventually wears out the springs and guide rails. With a motor suited to the shutter's weight, you open and close it with a key switch or a remote control.
Before motorising, we assess whether your current shutter can be kept or whether some parts should be replaced.
- Motor chosen according to the size and weight of the shutter.
- Key switch or remote control.
- Manual release option for power cuts.
- We reuse your existing shutter if it's in good condition.
Maintenance
Regular shutter servicing
A shutter that's opened and closed every day for years builds up wear. Regular servicing, with lubrication, spring adjustment and checks on the motor and lock, helps prevent it failing just when you need to open or close.
If you have several premises or manage a building with ground-floor shops, tell us about your situation and we'll organise it with you.
Business premises in Barcelona
Before you replace your shop shutter
The shutter is part of the façade. In protected buildings and some areas of the city there may be rules about how it looks, and the owners' association (comunidad de propietarios) may also have a say. We help you choose a shutter that suits the building and know what to check beforehand.
We work with businesses all over Barcelona, from Ciutat Vella and Eixample to Sants, Gràcia, Sant Andreu or Poblenou, and across the metropolitan area.
- Eixample
- Gràcia
- Sant Martí
- Ciutat Vella
- Sants-Montjuïc
- Les Corts
- Sarrià-Sant Gervasi
- Horta-Guinardó
- Nou Barris
- Sant Andreu
- Badalona
- Santa Coloma de Gramenet
- Sant Adrià de Besòs
- Montcada i Reixac
- Cerdanyola del Vallès
- L'Hospitalet de Llobregat
- Esplugues de Llobregat
- Cornellà de Llobregat
- Sant Just Desvern
- Sant Joan Despí
- Sant Feliu de Llobregat
- Sant Boi de Llobregat
- El Prat de Llobregat
- Viladecans
- Gavà
- Castelldefels
Common questions
Frequently asked questions about commercial metal shutters
Do you handle emergencies if the premises can't open or close?
We give priority to jammed shutters. We're available Monday to Friday, 08:30 to 20:00: call us and we'll tell you when we can be there.
Can a manual metal shutter be motorised?
In most cases, yes. We check the condition of the axle, guide rails and slats, and choose a motor suited to the shutter's weight.
Do you also repair the shutter lock?
Yes. We are locksmiths, so we repair and replace metal shutter locks, locking bolts and keys.
What's the difference between solid and micro-perforated slats?
Solid slats close off completely and give more privacy; micro-perforated slats let people see your shop window and let light through with the shutter down. We'll advise you based on your business.
Do you issue invoices to businesses?
Yes, we issue invoices with your company's or business's tax details.
I have several premises. Can you look after all of them?
Yes. Tell us how many there are and where, and we'll organise the visits and quotes together.
Is your shop shutter not working?
Call us or message us on WhatsApp and we'll tell you how and when we can help.
Contact
Request your no-obligation quote
Tell us what you need and we'll get back to you with the most suitable solution and quote.
-
Phone
611 37 54 95 -
WhatsApp
611 37 54 95 -
Email
info@merafex.es -
Service area
Barcelona y área metropolitana